Stainless Steel Piping Fabrication System 2-16"

• Customization: Available
• Automation: Automation
• Automatic Production Line: Comprehensive
• Model NO.: NAEC
• Flexible Production: Lean Production
• Origin: China

Product Description

Stainless Steel Piping Fabrication System 2-16"

Carbon Steel piping production line 2-8" is designed for small bore piping fabrication.

Applicable Industries: Oil & Gas Plants, Oil Refinery &Petrochemical Facilities, Onshore & Offshore Facilities, Nuclear Power Plants, Shipbuilding, Power Plants, etc.

Highlights:

1. realize 80% automated fabrication rate
2. matched with piping lean fabrication software management system realize 0.25manhour/DI productivity
3. reduce client's fabrication cost
4. guarantee client's fabrication quality
5. improve client's competitiveness

Technical Description

Production Line Type:	Fixed in workshop
Suit for Pipe Diameter:	2 to 8inch
Suit for Pipe Material:	CS
Suit for Pipe Wall Thickness:	2-25mm
Suit for Pipe Length:	12M
Pipe Cutting & Beveling Speed:	100times/8hrs
Cutting Precision:	1mm
Cutting Self Measuring Function	Included
Conveying Speed:	2-20 m/min
Fitting-up Mode:	Manual fitting up
Welding Type:	Automatic root pass, fill and cap pass
Welding Process:	TIG/MIG/SAW are available in one station
Management software:	Piping Lean Fabrication Software Management System
Average Productivity:	0.25manhour/DI

System Configuration:

Fabrication Procedure	Machines/stations
Cutting & beveling:	All-in-one pipe cutting & beveling machine
Conveying:	Conveying system
Pipe/fittings storage:	Pipes rack/ fittings rack
Pipe hoist:	Jib crane/ overhead crane
Fitting-up	Multi-function fitting up station
Welding	Automatic pipe welding station

Q&A:
Q:Is this system suitable for stainless steel fabrication?
A: To avoid pollution, CS and SS materials are fabricated separately usually. For SS material, all the covered surfaces are rubber covered or stainless steel sheet covered to avoid pollution. In fact all the machines are the same for CS or SS pipe fabrication, only the contacting surface are different.

Q: How to control the misalignment?
A: Several steps can control the misalignment and get good welding quality.
1.Precise cutting & beveling prepare better welding condition.
2.Control misalignment during fitting-up.
3. Our automatic welding station can allow 0-3mm misalignment and get good welding quality.

Q: What's the root pass method?
A: Usually we recommend automatic GTAW or RMD for root pass. While RMD is not acceptable by some users, we can support client to do PQR for different welding methods.

Q:What's the welding power brand?
A: It's USA MILLER.

Q: How to control welding quality?
A: Except to control every step processing quality before welding, we have programmed 40 sets WPS in our welding station for operate choose suitable WPS.

Q:How to deal with heavy thick wall pipes?
A: We have heavy duty type pipe welding station which can weld heavy thick wall pipes, such as power plant pipe spools.
 

Pipe Spool Fabrication Machines

1		Pipe Cutting& Beveling All-in-one Machine >Suitable for pipes not larger than 8",max.thickness:20mm >Cutting efficiency:100times/8hrs >PLC control with automatic measuring to guarantee the same processing cycle >Widely used for small bore C.S/S.S production lines
2		High Speed Band-saw Cutting Machine >Three models available(16"type,24"type",48"type) >PLC system control;self-measuring function with precision:±0.5mm >Using hydraulic self-centering chuck >It only takes 6 minutes to cut a 24" pipe of 25mm thickness >Widely used for C.S/S.S production lines.
3		High Speed CNC Pipe End Beveling Machine >Automatic self-centering chuck >Single V,double V,U type bevel >Can be matched with pipe end turning devic >High speed beveling:for example,it only takes 2.5minutes to get a 37.5 degree bevel for a S.S pipe end(diameter :610mm,thickness:25mm) >Several models available:16",24",32",48"
4		Two / Multi- Axis CNC Flame/Plasma Cutting Machine >High efficient pipe cutting with automatic self-measuring function, pipe end beveling, intersection line profiling for both main and branch pipe. >Five/multi-axis cutting machine can profile more complicated outlines with various bevel type >Standard machine suitable for pipes nor larger than 24''
5		Multi-function Pipe Fitting-up Station >Suitable for flange,elbow,tee,reducer to pipe and special T-joint fitting-up. >Light-duty type(manual) and heavy-duty type(motorized) are available. >Different types available, 8" type, 24" type, 32" type, 48" type, 60" type
6		Automatic Pipe Welding Station >With two welding heads >TIG/MIG/SAW are optional >PLC system control & WPS programmed >Max. efficiency fo reach welding head can be 400D.I/8hrs even use TIG/MIG technology. >Different types available, 8" type, 24" type, 32" type, 48" type, 60" type
7		Conveyor Handling System >used for pipe convenient transporation during in pipe spool fabrication. >Its speed is adjustable between 2M to 20M/min.

For more information, please contact us, thank you!